A dead gate always seems to happen at the worst time — you’re late for work, it’s pouring, and the thing just sits there ignoring the remote. Before you assume the worst (and the worst bill), it’s worth knowing that most of the no-open calls we run out to come down to a few ordinary causes. A handful you can sort out in the time it takes to find your phone.
Here’s how we work through it, in roughly the order we check things ourselves.
Start with power — it’s the answer more often than people expect
Nine times out of ten, a gate that’s gone completely silent isn’t broken. It’s lost power.
Have a look at the opener box and see if any lights are on. Pop your breaker panel and check whether the gate circuit has tripped; reset it once and see what happens. If your system has a battery backup, that battery may simply be flat — which is common after one of our winter windstorms knocks the grid out for a few hours.
One caution: if the breaker trips straight back, leave it. A breaker that won’t stay set is telling you there’s a wiring or motor fault underneath, and that’s a job for a technician, not a second reset.
A remote that “stopped working” usually just needs a battery
If the gate has power but won’t take a command, don’t overthink it. Swap the battery in the remote first — that single fix solves a huge share of the calls we get.
Still nothing? Try a second remote or the keypad. If one works and the other doesn’t, you’ve found your problem. If the gate ignores everything, the receiver or control board may need a look. And if you’ve been jabbing the keypad, give it a minute — a lot of them lock out for a short while after a few wrong codes.
Check the safety eyes — leaves and grime trip them constantly
Every proper automatic gate has photo-eye sensors that stop it moving the instant something crosses its path. When those eyes get blocked or dirty, the gate often refuses to budge at all, on purpose.
Wipe the lenses on both sides, clear away any cobwebs, leaves, or road grit, and make sure nothing’s parked in the gate’s path. Out here, with the wet weather and the leaf drop, this is one of the most common reasons a gate suddenly “won’t open” — and one of the easiest to fix from your driveway.
Look for something jamming the track
On sliding gates especially, a single pebble or a stray twig wedged in the track can stop the whole gate cold. Ice does the same thing on a cold morning. Walk the length of the track, clear out anything obvious, and look for any spot where the track itself is bent or the rollers look chewed up.
Whatever you do, don’t muscle the gate by hand to force it past a jam. You can burn out the motor or hurt yourself, and a bent track or worn roller is a repair either way.
When it grinds, drags, or stops halfway — stop and call us
Gates are heavy, and they open and close thousands of times a year. Sooner or later hinges seize, rollers wear, and the opener starts straining harder than it should. The tells are easy to recognize: grinding or screeching, slow or jerky movement, or a gate that opens partway and gives up.
This is where the DIY part ends. Motors, springs, and the structural hardware are under real tension and can do serious damage if they let go. If your gate sounds rough or moves unevenly, that’s the moment to bring in someone who does this every day.
The Pacific Northwest is hard on gate hardware
Our climate earns its reputation. Constant moisture corrodes electrical contacts and metal fittings; a hard freeze stiffens moving parts and drains backup batteries overnight. Gates put in with cheap, non-weather-rated parts are usually the first to quit come December — which is exactly why we only install components built to last in this climate, and why we steer customers away from the bargain hardware that fails fast.
A two-minute check before you pick up the phone
Run through this first:
- Power — lights on the opener, breaker holding, backup battery charged?
- Remote — fresh battery in, and does the keypad respond?
- Sensors — both safety eyes clean and clear?
- Path and track — nothing blocking the gate or wedged in the track?
If you’ve worked through all four and the gate still won’t open — or if anything grinds, looks damaged, or simply feels unsafe — don’t push it further. That’s the point where a quick repair beats turning a small problem into a big one.
A few questions we hear a lot
Why does my gate open but not close (or close but not open)?
Usually a sensor or limit-setting issue rather than a dead motor. A blocked safety eye is a frequent cause of a gate that opens fine but won’t close.
My gate worked last night and is dead this morning — what changed?
Most often an overnight power blip, a drained backup battery, or a cold-weather jam. Start with the power check above.
Is it worth repairing an older gate or should I replace it?
Depends on the gate. If the structure and posts are sound, repairs are usually the smart call. If the motor’s failed and the hardware is worn out across the board, replacement can cost less over time. We’ll tell you straight which one makes sense for yours.
Do you really come out 24/7?
Yes. A gate that fails open leaves your property exposed, so we run emergency calls around the clock across the Eastside.
Talk to a local team that’s been doing this since 2008
We’ve been repairing and installing automatic gates, fences, and garage doors across Seattle, Renton, Bellevue, Kent, Redmond, Issaquah, Kirkland and the wider Eastside since 2008. Family-owned, locally run, fully licensed, bonded, and insured — and available 24/7 for emergencies. We diagnose the real fault, lay out your options in plain English, and quote it honestly, with no surprise add-ons.
Gate giving you trouble? Get a free, no-obligation quote — or call us any time for emergency repair.
📞 (425) 900-4756 | Get My Free Quote →
